Customer Service | 800.325.4259
Sales | 314.567.5533

StarrSpace 3000 Portable Partition Walls System

General

The Pre-Engineered office system shall be SS3000 as manufactured by Starrco Company, Incorporated, St. Louis, MO. Starrco has been designing and manufacturing pre-engineered office systems since 1965.

Wall Panels

 

 

SP Panels Wall panels shall be a sandwich type construction with 1/8″ vinyl covered hardboard laminated to both sides of a 2 3/4″ thick noncombustible 1 lb. density expanded polystyrene core. Total panel thickness is 3″. Insulation value R-13.
DL Panels Wall panels shall be a sandwich type construction with 1/2” vinyl covered gypsum board laminated to both sides of 2″ thick noncombustible 1 lb. density expanded polystyrene core. Total panel thickness is 3″. Panel is Class A noncombustible when tested in accordance to ASTM-E-84. Insulation value R-11.
SC Panels Wall panels shall be a sandwich type construction with 1/8″ vinyl covered hardboard laminated to 5/8″ high density particle board on both sides of noncombustible 1 lb density expanded polystyrene core. Total panel thickness is 3″. Insulation value R-10.

 

 

Optional Finishes

Optional portable partition wall coverings include painted aluminum, painted steel, fiberglass reinforced plastic (FRP), Melamine, cork, PVC, etc.

Framework

 

 

Wire Studs Studs shall be extruded from 6063 aluminum alloy with T6 temper. Wire studs allow for electrical, data processing and communication lines to be run vertically in a raceway accessible from a removable cover plate.

Stud is designed in two pieces that allow both sides to be wired with electrical devices and communication receptacles. Design also gives system the capability of removing a panel without disturbing the adjacent panels.

Floor and Ceiling Track shall be extruded from 6063 aluminum alloy with T6 temper. Track shall be precut and mitered at the factory to eliminate the need for field cutting. Overall thickness of system at floor and ceiling crack is 3 7/16″.
Finish The aluminum extrusions are available in a “Khaki” Baked on Painted Finish. Special color painted finishes are available.
Height The system is available in the following standard heights: 8′, 9′, and 10′. Systems over 8′ tall may have spliced panels depending upon the panel construction or finish.